15 Tips to take care of your vessel

For your boat to always be in perfect condition and with excellent seaworthiness, you need to take some care with some frequency. Cleaning the interior and exterior, periodic maintenance of the hull, checking the hold, and checking the need for overcoating are some basic procedures to ensure the useful life of your vessel.

But do you know what care is needed to preserve the good condition of your boat? How often should they be carried out? How to do the maintenance? Here are some tips for taking care of your vessel and always making it ready to sail.

Tips for taking care of your vessel:

1. When returning from the sea, the engine must be washed with fresh water before being stored. Start the engine in freshwater to clean the cooling ducts and rid it of the harmful effects of salt. To avoid clogging the nozzles, it is necessary to do this cleaning weekly.
2. Spray the engine with oil-free lubricants, such as liquid petroleum jelly or silicone, to prevent the rubbers from drying out. This procedure must be carried out every two months to protect the starter and the injection area during execution.
3. To preserve the battery, place it to charge and disconnect the poles, periodically checking the battery charge. Check the battery regularly to see if the electrolyte level is adequate, how the oil is if you need to clean or change the filters or spark plugs.
4. Keep the electric winch motor (which helps to pull the anchor) inside the magazine, even if it is waterproof. Otherwise, water that constantly strikes the bow can shorten the life of the device.
5. Wash your boat after use. Marine water has a certain amount of impurities and corrosive salts, which contribute to reducing the useful life of your vessel’s parts. Therefore, apply a jet of freshwater, being careful not to wet any equipment that may be damaged by moisture.

6. To clean, apply a layer of high-quality wax over the entire smooth surface of the boat. Prefer to use nautical waxes instead of automotive waxes, as they are more resistant and suitable to protect the vessel against saltwater. Finally, buff with a flannel or dry towel. To give shine, you can shine with products that have a fine consistency. Scratches can also be removed with sandpaper and wax.
7. Periodically empty the fuel tanks, since if the product stays in the compartments for a long time, it can deteriorate them, clog the filters and damage the injection system.
8. Remove barnacles and mud from the hull whenever the boat returns from the sea. Use a wooden scraper (spatula) to avoid damaging the protective layer (gelcoat). Then wash the shell with water and biodegradable detergent or mild soap and then dry thoroughly.
9. After cleaning, use a protective cover to keep the boat protected from moisture and weather. The cover should be used even if the boat is kept in the marina.
10. Use EVA nautical mats. Unlike ordinary mats, which can cause dirt and moisture on boats, EVA mats make it difficult to fix dirt on the boat and protect the floor from moisture, ensuring that your ship is always free of oxidation.
11. Bad smell, dust mites, and humidity are common problems on boats, especially when they are stopped. For this reason, proper hygiene is necessary periodically. This service is provided by specialized companies, which have specific machinery and products.
12. Do not leave wet objects in the boat. Towels and diving supplies, only if they are completely dry. Periodically wash bed linens, curtains, and other internal fabric on the boat that may retain moisture.
13. Check the validity of safety fires (three years) and fire extinguishers (one year).
14. Always drain the water from the boat’s hold. Also, it must be pest control annually to avoid the infestation of cockroaches and rats.
15. Drain the drain box regularly so that there is no bad smell.

By following these tips to take care of your vessel, you will always be able to keep it safe and ready for use, and you will be able to keep the vehicle in good condition. In addition to these tips, there is equipment capable of increasing safety in various nautical practices and facilitating their use and transportation.

Discover the accessories for Nautical Robustec

Nautical equipment must be resistant to corrosion caused by seawater and meet technical requirements. Robustec has a line of marine product accessories, such as lashing straps, hand winches, support wheels, straps, and landing gear, with models for the most varied types of applications and activities.

The nautical lashing straps with a Moto hook are chemically treated for less water absorption. It also receives heat treatment, as required, which makes it suitable to withstand the weather and to be used at sea.

Robustec nautical hand winches are used, along with lashing straps, to drag boats, speedboats, jet-ski, and other marine equipment. Suitable for use at sea, they are developed with high-quality raw materials and withstand the weather.

These products have corrosion resistance and can be used at sea. Besides, the Robustec Nautical Line equipment obeys all technical requirements and meets the diverse needs of customers.

By taking such care with the maintenance of your boat, you can be sure that it will remain in good condition for longer so that you can always enjoy it with your family.

Did you like this article? Do you want to know more about Robustec nautical equipment and accessories? Access below:

Discover our Nautical line